Rakam Acrylic Topcoat

It is a solvent based special acrylic based topcoat, with long lasting excellent properties. It has excellent gloss, adhesion, chemical and weather resistance. The outdoor exposure and ultraviolet resistance is excellent. It posses excellent non- yellowing properties. It is easy to apply.

Main Features

  • Excellent scrub resistance and highly washable
  • Good color retention
  • Quick-drying
  • Excellent hiding power

Enquire Now

    Technical Datasheet

    Category: RAKAM STUCCO PUTTY

    Description

    Technical Data

    Specific gravity Approx. 1.14 g/cc
    Sold by volume Approx. 29%
    Coverage rate 8-10 m2/liter
    Dry film thickness 30 microns
    Shelf life 12 months
    Flash point not applicable
    Finish Gloss
    Drying time at 25°C Surface dry approx. 3-4 hours, Hard dry approx. 24 hours

    Application Data

    Surface Preparation

    The surface should be sound, dry and clean, free from dirt, oil, grease, and loose paint or powdery materials.

    Old painted surfaces

    • Remove the old paint as much as possible
    • Sand the entire surface and remove all the dust
    • Wash down the diluted ammonia solution
    • Rinse with clean water and allow to dry
    • Prime the surface to be painted with RAKAM acrylic primer
    • Apply one coat of RAKAM nuwtex by gun
    • Apply two coats of RAKAM acrylic topcoat

    New surfaces

    • Sand the surface until completely smooth
    • Removes all the dust
    • Prime the surface to be painted with RAKAM acrylic primer
    • Apply one coat of RAKAM nuwtex by gun
    • Apply two coats of RAKAM acrylic topcoat

    Application method

    Application method Brush/ Roller

    Airless Spray gun requirements

    Type of thinner Acrylic thinner
    Percentage of thinning 10-15 % max. by volume

    Air spray gun

    Type of thinner Acrylic thinner
    Percentage of thinning 10-15 % max. by volume
    Color see RAKAM color shade catalogue
    Packaging 5 US gallons, 1 US gallon

    Remarks

    • Stir well before use
    • Avoid application below 5°C or over 85 % relative humidity
    • After painting, clean the application tools immediately with water
    • Close container after use
    • Store in a cool and dry place
    • Keep out of reach of children
    • For more information, please do not hesitate to contact our technical department