RAK ACRYSEAL is a permanent, flexible sealant for a wide variety of internal applications where low (+/-5%) movement is anticipated. Excellent adhesion to most substrates.

Ordering Guide
Product No. 401
Packaging 5 / 20 kg Packs
Standards ASTM C733
Color White / Grey
Properties

RAK ACRYSEAL, Acrylic Flexible Filler is a non staining, sealant that resists cracking and gives a smooth finish that requires no sanding.

Enquire Now

    Technical Datasheet

    Category: SEALANTS & REPAIR MORATARS

    Description

    Technical Properties

    Application temperature +7°C to 40″C
    Working time 10 to 20 minutes
    Complete drying time (Depending upon the substrate) 36 hours
    Percentage solids 78 +2%
    Specific gravity 1.56
    Movement joint 10°A

    Uses

    Ideal for caulking and sealing:

    • Door and window frames
    • Skirting Boards
    • Floorboards
    • Walls
    • Ceilings
    • Plasterboards

    Adheres to:

    • Brick
    • Concrete
    • Plastic
    • Ceramics
    • Tiles

    Surface Preparation

    Ensure gaps and cracks to be filled are dry and free of grease, dirt, dust and any loose material. Fill the seam with sample amount of filler. Can be over-painted approximately two hours after application.

    Cleaning

    Clean tools with soap and water after use.

    Shelf Life

    Up to 8 months in unopened packs stored under 30°C. kept out of direct sunlight

    Application

    • Reseal container for storage and re-use. Store away from extreme heat and cold.
    • Joint sizes more than 20 mm wide or 10 mm deep must be filled with backing rod as a back-up filler.
    • Do not use for below waterline applications.
    • Do not use as a putty. Do not apply when temperature is below 7°C

    Caution

    Avoid contact with eyes and skin. Only use in well-ventilated areas. Keep out of reach of children.

    Health & Safety

    As with all chemical products, caution should always be exercised. Protective clothing, such as gloves and goggles, should be worn (see packaging for specific instructions). Treat any splashes to the skin or eyes with fresh water immediately. Should any of the product be accidentally swallowed, do not induce vomiting but call for medical assistance immediately. Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure product is stored as instructed on the safety section of the labelling.