Description
Physical Specification
| Specific gravity | Approx. 1.89 g/cc |
| Solid by volume | Approx. 80% |
| Coverage rate | 2-3 Kg./M² depends on the required design |
| Dry film thickness | Depends on the method of application and required texture |
| Shelf life | 1 Year |
| Flash point | Not applicable |
| Finish | Matt |
| Drying time at 25 °C | Surface dry: approx. 1 hour, Hard dry: approx. 12 hours |
* A second coat can be applied after 2 hours…
Surface Preparation
The surface should be sound, dry and clean, free from dirt, oil, grease, and loose paint, or powdery materials…
A. Old Painted Surfaces
- Remove the old paint as much as possible.
- Sand the entire surface and remove all the dust.
- Wash down with Ammonia Water Solution.
- Rinse with clean water and allow to dry.
- Prime the surface to be painted with STELLAR Primer Sealer or STELLAR Latex Sealer.
- Fill cracks and holes with STELLAR Wall Putty or STELLAR Acrylic Filler.
- After drying, sand the putty and clean the surface once again.
- Apply two coats of STELLAR Interior Emulsion.
A. New Surfaces
- Sand the surface until completely smooth, remove all the dust.
- Prime the surface to be painted with STELLAR Primer Sealer or STELLAR Latex Sealer.
- Apply 1-2 Coats of STELLAR Wall Putty or STELLAR Acrylic Filler.
- After drying, sand the putty and clean the surface.
- Apply two coats of STELLAR Interior Emulsion.
Instructions for use
Airless Spray Gun
| Type of thinner | Clean Water |
| Percentage of thinning | 0 – 5% max. by volume |
Subsequent Coats
- STELLAR Gloss Emulsion
- STELLAR Exterior Acrylic Emulsion
- STELLAR Polyurethane Gloss Enamel 2K
Packing
18 Lt./drum, 4lt gallon
Remarks
- Stir well before use…
- Avoid application below 5 °C or over 85% relative humidity.
- After using, clean the application tools immediately with water.
- Close container after use.
- Store in a cool and dry place.
- Keep out of reach of children.
- For more information, please do not hesitate to contact our Technical Department.
