Description
Technical Properties
| ACCREDITED TEST BY DUBAI MUNICIPALITY | |
| Tensile Adhesion | >1.5 N/mm2 |
|---|---|
| Strength 28 Days | EN1348:2007 |
| Open Time | 20 min(mini) EN 1346:2007 |
| Slip Resistance(14 Days standard Condition, 14 Days in Oven) | < 0.5 EN1308:2007 |
| Test Conditions | 23+ 2°c,50+ 5%RH |
| Storage Conditions | EN1348:2007 |
| Aspect | Powder |
| Composition | Cement, Sand, Lime & Additives |
| Color | Grey / White |
| Density | 1 .7kg/ltrs |
| Flash Point | Not applicable |
| Particle Size | Max 0.5 mm |
Instruction for Use
Mix RAKAM Super Tile Fix in a ratio of 5 to 7 liters of water per 20 kg bag. Mix to a uniform lump-free consistency . Leave for approximately 5 minutes to allow the resins to completely dissolve. Moisten the support if necessary , mixing should be by a forced action mixer . Hand mixing is recommended for small quantities only
Supports
Headed Concrete, Mortar Rendering and hard board Plaster ,Brick, Masonry and stone. The Supports Should be Clean Sound, free of dust and oily Materials.
Points to be Noted
The Open Time of RAK Super Tile Fix at 30°C Approximately 40 minutes. Therefore care should be taken in preparing the mortar . Prepare only the surface which can be Tiled within this time. RAK Super Tile Fix should not used on painted or Metal surfaces.
Consumption
Approximately 2 kg/m depending on the support. Clean the tools with water after use. Store in dry conditions and protect against wind, rain and Direct Sunlight.
Coverage
Solid bed fixing: 3mm – 5 mm depth 5 – 6 kg/m² Notch trowel : 1/4″x1/4”x1/4” 2kg/m²
Shelf Life
RAK Super Tile Fix can be kept for 12 months in unopened packs
Application
Apply RAK Super Tile Fix to a uniform thickness of 3 mm to 6 mm on the support to cover the slots on the back of the tiles on an area of not more than 1m at time. for horizontal applications a solid bed fix is recommended as well as for heavy duty vertical applications. For other vertical applications use a toothed spatula to comb horizontally to remove excess. The trowel should have 6 mm notches at 25mm intervals centre to centre. Apply the tiles, press it. Smooth out carefully so that the mortar is spread evenly . If the bonding is perfect, the tiles will not slide. The joints can be filled with RAK grout (available in Grey , white or matching colors on request).
Health & Safety
As with all chemical products, caution should always be exercised. Protective clothing such as gloves and googles should be worn (see packaging for specific instructions). Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidently swallowed do not inducce vomiting, but call for medical assistance instructions and content details.Reseal all containers after use and ensure product is stored as instructed on the safety section of the labelling immediately.
