Skip links

208 RAK Proof-FB

Acrylic Waterproof with Fibre

RAK PROOF FB is a specially formulated hi build single pack, high quality, elastomeric waterproof coating. It has outstanding durability, uv resistance and a very high degree of flexibility.

Ordering Guide
Product No. 208
Packaging 5, 20 kg Packs
Standards ASTM D 4541 BS EN 12390 Pt 8:2000
Color White
Advantages
  • One component; ready to apply direct from the can
  • Liquid application means details are simplified and there are no joints in the membrane.
  • Highly elastic , cures to give a permanently flexible resilient barrier over a wide range of temperatures.
  • Rapid Installation; significantly reduces time spent on
  • Preparatory works and detailing Excellent adhesion can be applied to a wide range of substrates.
  • Continuous adhesion prevents lateral migaration of water
  • Impervious outstanding barrier properties ensure protection against corrosive soil conditions
  • Thermally stable-irreversible chemical cure
  • Eliminates melting and flow at high temperature
  • Excellent resistance to oxidation and embrittlement
  • Mechanical damage to the membrane can be easily repaired by spot application
Category:

Description

Technical Properties

Density 1.25g/cc
pH 8-8.5
Solid content 65 + 2% by weight
Elongation at – break 600 %
Colour White
Toxicity Non – toxic
Tack free time @30°C 6 hours
Time to full cure @30°C 48 hours at 1.3mm thickness
Typical cured membrane properties (at 28 days) Elongation (ASTM D412) 600%
Tensile Strength (ASTM D4541) 1.8 N/mm2
Recovery from 400% elongation (ASTM D412) 95%
Tear resistance (ASTM D624) 16N
Water vapour transmission for 1.3 mm film (ASTM E96) 6.2 g/m2/24 hrs.
Permeability @ 7 bar pressure 7th Day (BS EN 12390 Part 8 : 2000) Nil
Artificial weathering No loss of flexibility after 4000 hours exposure
Service temperature (continuous ambient) -40°C to 70°C

Uses

The high elasticity, excellent bond and low water permeability of RAK Proof-FB makes it ideal for a wide range of water/vapour proofing applications such as foundations, basements, tunnels, ground floors, suspended floors, car decks, roof terraces, balconies, patios, bridges, precincts, inspection pits, water retaining structures( not potable water), sewage works, inverted roofs , toilets, bathrooms, kitchens etc. The excellent chemical resistance of RAK Proof-FB makes it particularly suitable for tanking applications in areas where agressive ground water conditions prevail.

Shelf Life

Must be protected between 5°C and 30°C. 12 months in unopened airtight containers.

Cleaning

Clean all tools with water after use.

Application

The support must be clean, free of dust, dirt, oil, grease and loose particles. When applying on metal surfaces,remove rust and contamination for best results. Apply with brush, roller or an approximate spray. Apply a primer coat of RAK Proof-FB (80% RAK Proof-FB + 20% water) with brush, roller or spray. Once the primer coat has completely dried, apply minimum two coats of undiluted RAK Proof-FB. It is important to ensure that coat has totally cured(i.e-min 6 hours at 30°C).

Health & Safety

As with all chemical products, caution should always be exercised. Protective clothing such as gloves and googles should be worn (see packaging for specific instructions). Treat any splashes to the skin or eyes with fresh water immediately. Should any of the products be accidently swallowed do not inducce vomiting, but call for medical assistance instructions and content details.Reseal all containers after use and ensure product is stored as instructed on the safety section of the labelling immediately.