Description
Technical Properties
| Appearance | Colourless, clear liquid dries to tack-free film. |
|---|---|
| Specific gravity | 0.8 |
| Minimum application temp | 5°C |
| MFFT | N/A as penetrating impregnation |
| Flash point | 40°C |
Uses
- Excellent surface protection for on-site, precast concrete and masonry structures
- Water repellent for stonework
Features
- Provides a protective treatment for concrete surfaces
- Forms a hydrophobic lining to capillaries
- Water repellent
- Colourless
Coverage
Average 6-10 m2/litre per coat, depending on the porosity of the surface and method of application.
Application
All the surface to he coated should be fully cured, duly and free from demolding oil, or curing membranes. The surface should be perfectly dry before coating with RAK Siloxane. RAK Siloxane is applied with either a low-pressure spray or brush. Stir the material well before use. Do not dilute with water or solvents. On vertical surfaces, RAK Siloxane should be flooded on, starting at the bottom, working steadily upwards. When used as protective impregnation, apply two coats as a minimum. Apply a second coat immediately after applying the first, ensuring the first coat does not dry, i.e. wet on wet.
Special Notes
- RAK Siloxane reacts with moisture, therefore keep the container sealed when not in use
- Surface must be perfectly dry
- Ensure, adequate ventilation
- High winds will interfere with the application
- Protective barriers may be required
- RAK Siloxane may darken some polymer modified substrates & white cement. A trial area is recommended
Shelf Life
Up to 12 months when stored in sealed containers out of direct sunlight and high temperatures.
Caution
RAK Siloxane is solvent based and therefore highly flammable.
- Apply in a well ventilated areas
- Store away from sunlight
- Apply away from naked flames
Health & Safety
As with all chemical products, caution should always be exercised. Protective clothing, such as gloves and goggles, should be worn (see packaging for specific instructions). Treat any splashes to the skin or eyes with fresh water immediately. Should any of the product be accidentally swallowed, do not induce vomiting but call for medical assistance immediately. Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure product is stored as instructed on the safety section of the labelling.
