Rakam Top Coat Clear
Rakam best, high gloss or matt clear Emulsion paint, based on highly modified pure acrylic resin specially formulated for use on all types of
interior and exterior surfaces such as concrete, wall papers, masonry, and gypsum.
Main Features
- Excellent scrub resistance and highly washable.
- Excellent weathering resistance.
- Excellent durability and scratch resistance.
- Smooth and flexible.
Category: RAKAM STUCCO PUTTY
Description
Physical Specification
| Specific gravity | Approx. 1.01 g/cc |
| Solid by volume | Approx. 37% |
| Coverage rate | 10-12 M²/Liter |
| Dry film thickness | 30 Microns |
| Shelf life | 12 Months |
| Flash point | Not applicable |
| Finish | Gloss or Matt |
| Drying time at 25 °C | Surface dry: approx. 1 hour, Hard dry: 3 – 4 hours |
* A second coat can be applied after 4 hours…
Surface Preparation
The surface should be sound, dry and clean, free from dirt, oil, grease, and loose paint, or powdery materials…
A. Old Painted Surfaces
- Remove the old paint as much as possible.
- Sand the entire surface and remove all the dust.
- Wash down with Ammonia Water Solution.
- Rinse with clean water and allow to dry.
- Prime the surface to be painted with RAKAM Latex Sealer.
- Fill cracks and holes with RAKAM Wall Putty or RAKAM Acrylic Filler.
- After drying, sand the putty and clean the surface once again.
- Apply one coat of RAKAM Texture or Tex Coating.
- Apply two coats of RAKAM Top Coat clear.
A. New Surfaces
- Sand the surface until completely smooth, remove all the dust.
- Prime the surface to be painted with RAKAM Latex Sealer.
- Apply 1-2 Coats of RAKAM Wall Putty or RAKAM Acrylic Filler.
- After drying, sand the putty and clean the surface.
- Apply one coat of RAKAM Texture or Tex Coating.
- Apply two coats of RAKAM Top Coat clear.
Instructions for use
Air spray (Hopper Gun)
| Type of thinner | Clean Water |
| Percentage of thinning | 10 – 15% max. by volume |
| Nozzle orifice | 0.015″ – 0.018″ |
| Output pressure | 5 – 6 bar |
Air Spray Gun
| Type of thinner | Clean Water |
| Percentage of thinning | 10 – 15% max. by volume |
| Nozzle orifice | 1.5 – 2.0 mm |
| Output pressure | 2 – 3 bar |
Brush / Roller
| Type of thinner | Clean Water |
| Percentage of thinning | 10 – 20% max. by volume |
Packing
18 Ltr./drum, 1 US gallon
Remarks
- Stir well before use…
- Avoid application below 5 °C or over 85% relative humidity.
- After using, clean the application tools immediately with water.
- Close container after use.
- Store in a cool and dry place.
- Keep out of reach of children.
- For more information, please do not hesitate to contact our Technical Department.
