Skip links

Head Office: P.O. Box: 11005, RAK, UAE

Facebook-f Instagram Linkedin-in
RAKAM | RAK Adhesive & Waterproof Materials

Stellar Vinyl Silk Emulsion

A fine quality high gloss Emulsion paint, based on highly modified co-polymer resin specially formulated for use on all types of interior and exterior surfaces such as concrete, cement, plaster, wall papers, masonry, brickwork’s, and gypsum.

Main Features
  • Excellent scrub resistance and highly washable.
  • Good colour retention.
  • Flow and leveling properties.
  • Excellent hiding power.
  • Smooth and flexible.
Enquire Now
Technical Datasheet
1 Step 1
Enquire Now
reCaptcha v3
keyboard_arrow_leftPrevious
Nextkeyboard_arrow_right
FormCraft - WordPress form builder
Category:

Description

Physical Specification

Specific gravity Approx. 1.15 g/cc
Solid by volume Approx. 40%
Coverage rate 10-12 M²/Liter
Dry film thickness 30 Microns
Shelf life 1 Year
Flash point Not applicable
Finish Gloss
Drying time at 25 °C Surface dry: approx. 1 hour, Hard dry: 3 – 4 hours

* A second coat can be applied after 4 hours…

Surface Preparation

The surface should be sound, dry and clean, free from dirt, oil, grease, and loose paint, or powdery materials…

A. Old Painted Surfaces

  1. Remove the old paint as much as possible.
  2. Sand the entire surface and remove all the dust.
  3. Wash down with Ammonia Water Solution.
  4. Rinse with clean water and allow to dry.
  5. Prime the surface to be painted with STELLAR Primer Sealer or STELLAR Latex Sealer.
  6. Fill cracks and holes with STELLAR Wall Putty or STELLAR Acrylic Filler.
  7. After drying, sand the putty and clean the surface once again.
  8. Apply two coats of STELLAR vinyl silk Emulsion.

A. New Surfaces

  1. Sand the surface until completely smooth, remove all the dust.
  2. Prime the surface to be painted with STELLAR Latex Sealer.
  3. Apply 1-2 Coats of STELLAR Wall Putty or STELLAR Acrylic Filler.
  4. After drying, sand the putty and clean the surface.
  5. Apply two coats of STELLAR vinyl silk Emulsion.

Instructions for use

Airless Spray Gun

Type of thinner Clean Water
Percentage of thinning 10 – 15% max. by volume
Nozzle orifice 0.015″ – 0.018″
Output pressure 120 – 140 bar

Air Spray Gun

Type of thinner Clean Water
Percentage of thinning 10 – 15% max. by volume
Nozzle orifice 1.5 – 2.0 mm
Output pressure 2 – 3 bar

Brush / Roller

Type of thinner Clean Water
Percentage of thinning 10 – 20% max. by volume

Colours

See STELLAR Colour shade catalogue

Packing

18 Lt./drum, 4lt gallon

Remarks

  • Stir well before use…
  • Avoid application below 5 °C or over 85% relative humidity.
  • After painting, clean the application tools immediately with water.
  • Close container after use.
  • Store in a cool and dry place.
  • Keep out of reach of children.
  • For more information, please do not hesitate to contact our Technical Department.

Related Products