Description
Physical Specification
| Specific gravity | Approx. 1.40 g/cc |
| Solid by volume | Approx. 36% |
| Coverage rate | 10-12 M²/Liter |
| Dry film thickness | 30 Microns |
| Shelf life | 1 Year |
| Flash point | Not applicable |
| Finish | Silk |
| Drying time at 25 °C | Surface dry: approx. 1 hour, Hard dry: approx. 2 hours |
* A second coat can be applied after two hours…
Surface Preparation
The surface should be sound, dry and clean, free from dirt, oil, grease, and loose paint, or powdery materials…
A. Old Painted Surfaces
- Remove the old paint as much as possible.
- Sand the entire surface and remove all the dust.
- Wash down with Ammonia Water Solution.
- Rinse with clean water and allow drying.
- Prime the surface to be painted with STELLAR Latex Sealer.
- Fill cracks and holes with STELLAR Wall Putty or STELLAR Acrylic Filler.
- After drying, sand the putty and clean the surface once again.
- Apply two coats of STELLAR eggshell.
A. New Surfaces
- Sand the surface until completely smooth, remove all the dust.
- Prime the surface to be painted with STELLAR Latex Sealer.
- Apply 1-2 Coats of STELLAR Wall Putty or STELLAR Acrylic filler.
- After drying, sand the putty and clean the surface.
- Apply two coats of STELLAR eggshell.
Instructions for use
Airless Spray Gun
| Type of thinner | Clean Water |
| Percentage of thinning | 10 – 15% max. by volume |
| Nozzle orifice | 0.015″ – 0.018″ |
| Output pressure | 120 – 140 bar |
Air Spray Gun
| Type of thinner | Clean Water |
| Percentage of thinning | 10 – 15% max. by volume |
| Nozzle orifice | 1.5 – 2.0 mm |
| Output pressure | 2 – 3 bar |
Brush / Roller
| Type of thinner | Clean Water |
| Percentage of thinning | 10 – 20% max. by volume |
Colours
See STELLAR Color shade catalogue
Packing
18 Lt./drum, 4lt gallon
Remarks
- Stir well before use…
- Avoid application below 5 °C or over 85% relative humidity.
- After painting, clean the application tools immediately with water.
- Close container after use. Store in a cool and dry place.
- Keep out of reach of children.
- For more information, please do not hesitate to contact our Technical Department.
