Rakam Wall Putty
A Poly-vinyl acetate ready mixed putty, designed for filling minor cracks, small dents, voids, air-holes and eliminating surface imperfections, recommended for use on interior concrete and plaster surfaces, to give a fine and smooth surface.
Main Features
- Can be applied directly on to the surface.
- Ease of application.
- Easy to sand when dry.
- Non-sagging properties at high film thickness.
- Excellent filling properties.
- Good adhesive strength.
Category: RAKAM PAINTS
Description
Physical Specification
| Specific gravity | Approx. 1.75 g/cc |
| Solid by weight | Approx. 72% |
| Coverage rate | 0.5 – 1.0 Kg/ M² depending on surface condition |
| Dry film thickness | max 1 mm |
| Shelf life | 1 Year |
| Flash point | Not applicable |
| Finish | Matt |
| Drying time at 25 °C | Surface dry: approx. 1 hour, Hard dry: approx. 2 hours |
* Next coat can be applied after 4 hours…
Surface Preparation
The surface should be sound, dry and clean, free from dirt, oil, grease, and loose paint, or powdery materials…
New Surfaces
- Sand the surface until completely smooth, removes all the dust.
- If the surface is too much dry, the surface should be wetted with clean water.
- Apply one coat of Rakam Primer Sealer or Rakam Latex Sealer, if the surface is too much porous.
- Apply 1-2 Coats of Rakam Wall Putty.
- After drying, sand the putty and clean the surface.
Subsequent Coats
Rakam Primer Sealer
Rakam Undercoat
Colour
White
Packing
18lt./drum , 4 lt./gallon
Remarks
- Stir well before use…
- Avoid application below 5 °C or over 85% relative humidity.
- After using, clean the application tools immediately with water.
- Close container after use.
- Store in a cool and dry place.
- Keep out of reach of children.
- For more information, please do not hesitate to contact our Technical Department.
