Description
Technical Properties
| Solid content | 48% |
|---|---|
| Specific Gravity | 1.06-1.08 |
| Viscosity (Brookfield) | 20,000-25,000 cps |
| M.F.F.T | 5°C |
| Polymer | Polyvinyl Acetate |
| Binder | Polyvinyl Alcohol |
| Open time | 20-30 min |
| Curing time | Initial 2 hrs. Final 24 hrs, to take load |
| Dry film appearance | Tough, Clear |
| Toxicity | Non Flammable / Non Toxic |
| Dilutent | Water |
| Preservatives | Anti fungicide |
Uses
RAK Wood has excellent adhesion to wood based products in cold and hot setting applications. Compatible with wide range of wood such as veneer, plywood, blackboards, hardboards, chip boards and fiber boards. Application includes assembly gluing, panel surfacing, veneer and paper foil lamination, finger jointing, laminating and edge joining, veneer slicing, etc.
Coverage
Approximately 4-6 m2 per kg. Depending on substrate
Packaging
- 5 kg. Pail
- 20 kg. Pail
- 200 kg. Drum
Direction of use
Before applying, the surface should be prepared clean and even, free from dust, loose shavings, oil and grease. Apply RAK Wood either by brush or brush pressure feeding equipment to a uniform coat. If the surfaces are all end-grain and very porous, apply a second coat, after allowing first to dry. Allow few minutes then assemble the surface. Apply pressure, no heavy clamping necessary. Normal hand pressure or standard clamping is su cient to give a strong bond. Setting time varies for surfaces from 20 minutes to 3 hours depending on thickness of layers of adhesives, wood type, moisture and temperature. Excess adhesive peeling o from sides can be easily cleaned with wet damp cloth, before setting.
Technical Service Department
RAKAM is pleased to o er full technical support on specific application
Storage
12 months in unopened containers, store away from sunlight and preferably at 10-30°C. Non Toxic and Non-flammable.
Health & Safety
As with all chemical products, caution should always be exercised. Protective clothing, such as gloves and goggles, should be worn (see packaging for specific instructions). Treat any splashes to the skin or eyes with fresh water immediately. Should any of the product be accidentally swallowed, do not induce vomiting but call for medical assistance immediately. Ensure the container is available for the medical attendant to examine any relevant instructions and contents details. Reseal all containers after use and ensure product is stored as instructed on the safety section of the labelling.
